• ADVR 9598
  • ADVR 9597
  • ADVR 9596
  • ADVR 9594
  • ADVR 9593
  • ADVR 9595

Advanced Robotics research concentrates on an innovative, multidisciplinary approach to humanoid design and control, and the development of novel robotic components and technologies. This encompasses activities from both the hard (mechanical/ electrical design and fabrication, sensor systems, actuation development etc.) and soft (control, computer software, human factors etc) systems areas of robotics.

Biomedical Robotics

The Biomedical Robotics Laboratory focuses on research and development of human-centered robotic technologies. We are a highly multidisciplinary group working towards the creation of novel technologies that can directly impact the health and well-being of people.

The overall research theme involves the creation of robotic systems to augment human capabilities through enhanced interfaces. This includes research in areas such as robot-assisted surgery, micromanipulation, human-robot interfaces, assistive systems for the disabled, medical imaging and computer vision, teleoperation, cognitive controllers, and automation. Typical goals are to improve the consistency, efficiency, usability and safety of difficult and/or delicate operations traditionally performed manually.

Laboratories

The Biomedical Robotics Laboratory is part of the Advanced Robotics Department and counts with a larger range of state-of-the-art equipment that support our research and stimulate the curiosity of our researchers. These include surgical laser systems, microscopes, motorized micromanipulators, haptic devices, EEG systems, robotic arms, endoscopes, and many other scientific instruments. We also have a dedicated room for Class-IV laser experiments, where novel laser microsurgery prototypes are developed and safely tested.

Collaborations

We deeply believe in collaborations to speed-up the progress of human-centered technologies and achieve meaningful results. Therefore, we are always open to new and challenging opportunities to collaborate with other groups and institutions. The multidisciplinarity of our research is a result of this vision. We currently have collaborations in the medical robotics area with the San Martino Hospital (ENT Department, UNIGE), NearLab (Politecnico di Milano), AIMS Academy (Niguarda Hospital), ALTAIR Laboratory (University of Verona), and El.En S.r.l. (Firenze). In addition, we are developing novel assistive systems for ALS patients with the Fondazione Roma.

Lead Researcher: Leonardo De Mattos

Exoskeletons

Our group works on the development of wearable assistive exoskeletons. The objective of these devices is to assist people during physical activities. Target users span from industrial workers, aiming to reduce musculoskeletal loads and the associated risk of injuries, to people with movement impairments due to conditions such as stroke or spinal injury, aiming to enable to to carry out activities of daily living.

From a research perspective, our group focuses on advances that will enable exoskeletons to succeed in real-life applications. This includes high-performance actuation systems, with the target of keeping weight and power consumption to a minimum while producing substantial physical assistance and promoting comfort. Our research comprises also assistive strategies based on the combination of relevant measurements from the environment with biosignals from the user. Our group strives to maximise the deployability of the developed devices in real-life scenarios. To this end, our approach considers the invasiveness and costs associated to the physical interfaces. Additionally, we seek to inform the development of our devices by frequently evaluating them in user studies.

Laboratories

Our team has developed a wearable robotic back support device, within the context of the Robo-Mate EU Project. This system is aimed to the assistance of the operators in industry during manual handling tasks and in awkward positions. Its goal is to offload the user’s low back, thereby reducing the associated pain and risk of injury.

We are currently developing a soft biomimetic exoskeleton to assist people with mobility impairments, within the context of the XoSoft EU Project.
This project will deliver a modular exoskeleton for the lower limb made of soft materials as an assistive device for persons with low to moderate mobility restrictions. The development of exoskeletons using soft materials is an innovative field with many relevant potential applications. Approaches allowing more compact, low weight and comfortable solutions are strongly needed. A small number of important developments in this respect have been made, which will enable the development of soft exoskeletons.

Collaborations

We are currently collaborating with a broad number of research institutions and companies with common interests in the area of wearable assistive robots.

We have a narrow collaboration with:

  • research groups at ZHAW (Zürcher Hochschule für Angewandte Wissenschaften) - Departments of mechatronics and physiotheraphy
  • UL (University of Limerick) - Department of human factors and ergonomics
  • CSIC (Consejo Superior de Investigaciones Científicas) - Center of automotion and robotics
  • Fraunhofer - Institute for industrial engineering 
  • TNO 
  • Saxion university of applied science
  • RRD (Roessingh Research and Development) 

Industrial collaborations are also a core part of our activities. We are currently licensing the Robo-Mate technology to German Bionic Systems, while our narrow collaboration with CRF (Centro Ricerche Fiat) helps to keep our developments in industrial exoskeletons close to the real applications. Our recent collaboration with INAIL (Istituto Nazionale per l'Assicurazione contro gli Infortuni sul Lavoro) will represent a big leap in the state-of-the-art of industrial exoskeletons.

Lead Researcher: Jesus Ortiz

Advanced Industrial Automation Lab

In the last few years, various manufacturing industries wishing to explore robotic manipulation, automatic inspection etc …have shown a growing interest in our lab. In the last few years, various manufacturing industries wishing to explore robotic manipulation, automatic inspection etc …have shown a growing interest in our lab. This has been possible thanks to the introduction of robots as something more than “simple” research prototypes. The Advanced Industrial Automation Lab (AIAL) has been set up exactly for this purpose. AIAL relies on a team of experts having the necessary skills and know how to liaise with manufacturing industries in the diverse facets they operate: from quality control to process automation. Our focus is both on innovation and research, the areas where technical consultancy is not frequent due to lack of skills, lack of resources or resistance to the introduction of new technologies in consolidated industrial environments. AIAL is devoted to technology transfer with the aim of projecting the results obtained in robotics on to the industry thanks to collaborations with other European researchers and experts. The interdisciplinarity is our key brick, both in skills and mission. Our job spans from dynamics to control and from the innovation to research.

Activities

AIAL’S activities are divided into 2 main areas: AIAL’S activities are divided into 2 main areas:

 
• InnovationArea

The innovation area aims to apply new technologies directly to the industrial world. This activity requires a high level of fine-tuning between companies’ needs and the research output produced by IIT. Companies frequently need to develop a medium-term vision about their technological renewal, which would entail a significant review of their production processes. AIAL comes right into this and does its best to support them in their innovation goals. The most important projects the lab has been involved in include the following companies: GE AVIO AEREO, Tetra Pak, Fameccanica Group, ANSALDO ENERGIA, etc.


• ResearchArea

The research area focuses on the development of new technologies likely to be applied to the industry in the near future. Here companies with a long-term vision of their manufacturing activities are the main actors involved. Current projects include light and fast robotics arms to increase safety at work, high-speed manipulators, sensors to detect forms of peripheral neuropathy to the lower and upper limbs and cardboard boxes production. Most projects have been financed through internal IIT funds and EU grants (Autorecon, EuroC and WearHap). One primary aspect connected to this activity is the development of numerical models capable of making the design of future mechanisms more accurate and faster. In this respect, a collaboration with MSC.Software is currently active.

Laboratories

The Advanced Industrial Automation Lab has several platforms (ABB anthropomorphic robot, manipulators, grippers, medical devices, inspection robots, test rigs, etc.) to investigates the performances and validate the virtual models of robots. Moreover in the ADVR there are the state-of-the-art facilities to develop, build and test legged robots (Co-Man, HyQ, HyQ2Max, Walk-Man and Centaurus) with compliant electrical and hydraulic actuation.

Collaborations

The AIAL collaborates mainly with industries (GE AVIO AEREO, Tetra Pak, Fameccanica Group, ANSALDO ENERGIA, etc.), but also with universities and other research centres thanks to the European Projects (Autorecon, EuroC, WearHap) and/or the collaboration within research projects (Politecnico di Torino, King’s College of London, Spedali Civili di Brescia, Università Politecnica delle Marche, etc.).

Lead Researcher: Ferdinando Cannella

Related Lines